Name : LPC43xx
description : Register cmsis file for LPC43xx parts
Architecture : ARM Cortex-M4 (CM4)
revision : r0p0
endian : little
Number of relevant bits in Interrupt priority : 3
name : ADC0
description : 10-bit Analog-to-Digital Converter (ADC)
base address : 0x0
Interrupt (17) ADC0
name : ADC1
description : 10-bit Analog-to-Digital Converter (ADC)
base address : 0x0
Interrupt (21) ADC1
name : ADCHS
description : 12-bit Analog-to-Digital Converter High-Speed (ADCHS)
base address : 0x0
Interrupt (45) ADCHS
name : ATIMER
description : Alarm timer
base address : 0x0
Interrupt (46) ATIMER
name : CCU1
description : Clock Control Unit (CCU)
base address : 0x0
name : CCU2
description : Clock Control Unit (CCU2)
base address : 0x0
name : CGU
description : Clock Generation Unit (CGU)
base address : 0x0
name : CREG
description : Configuration Registers (CREG)
base address : 0x0
name : C_CAN0
description : C_CAN
base address : 0x0
Interrupt (51) C_CAN0
name : C_CAN1
description : C_CAN
base address : 0x0
Interrupt (43) C_CAN1
name : DAC
description : Digital-to-Analog Converter (DAC)
base address : 0x0
Interrupt (0) DAC
name : EEPROM
description : EEPROM
base address : 0x0
Interrupt (4) FLASH
name : EMC
description : External Memory Controller (EMC)
base address : 0x0
name : ETHERNET
description : Ethernet
base address : 0x0
Interrupt (5) ETHERNET
name : EVENTROUTER
description : Event router
base address : 0x0
Interrupt (42) EVENTROUTER
name : GIMA
description : Global Input Multiplexer Array (GIMA)
base address : 0x0
name : GPDMA
description : General Purpose DMA (GPDMA)
base address : 0x0
Interrupt (2) DMA
name : GPIO_GROUP_INT0
description : GPIO group interrupt 0
base address : 0x0
Interrupt (40) GINT0
name : GPIO_GROUP_INT1
description : GPIO group interrupt 0
base address : 0x0
Interrupt (41) GINT1
name : GPIO_PIN_INT
description : GPIO pin interrupt
base address : 0x0
Interrupt (32) PIN_INT0
Interrupt (33) PIN_INT1
Interrupt (34) PIN_INT2
Interrupt (35) PIN_INT3
Interrupt (36) PIN_INT4
Interrupt (37) PIN_INT5
Interrupt (38) PIN_INT6
Interrupt (39) PIN_INT7
name : GPIO_PORT
description : GPIO port
base address : 0x0
name : I2C0
description : I2C-bus interface
base address : 0x0
Interrupt (18) I2C0
name : I2C1
description : I2C-bus interface
base address : 0x0
Interrupt (19) I2C1
name : I2S0
description : I2S interface
base address : 0x0
Interrupt (28) I2S0
name : I2S1
description : I2S interface
base address : 0x0
Interrupt (29) I2S1
name : LCD
description : LCD controller
base address : 0x0
Interrupt (7) LCD
name : MCPWM
description : Motor Control PWM (MOTOCONPWM)
base address : 0x0
Interrupt (16) MCPWM
name : PMC
description : Power Management Controller (PMC)
base address : 0x0
name : QEI
description : Quadrature Encoder Interface (QEI)
base address : 0x0
Interrupt (52) QEI
name : REGFILE
description : RTC REGFILE
base address : 0x0
name : RGU
description : Reset Generation Unit (RGU)
base address : 0x0
name : RITIMER
description : Repetitive Interrupt Timer (RIT)
base address : 0x0
Interrupt (11) RITIMER
name : RTC
description : Real-Time Clock (RTC) and event recorder
base address : 0x0
Interrupt (47) RTC
name : SCT
description : State Configurable Timer (SCT) with dither engine
base address : 0x0
Interrupt (10) SCT
name : SCU
description : System Control Unit (SCU) I/O configuration
base address : 0x0
name : SDMMC
description : SD/MMC
base address : 0x0
Interrupt (6) SDIO
name : SGPIO
description : Serial GPIO (SGPIO)
base address : 0x0
Interrupt (31) SGPIO_IINT
name : SPI
description : SPI
base address : 0x0
Interrupt (20) SPI_INT
name : SPIFI
description : SPI Flash Interface (SPIFI)
base address : 0x0
Interrupt (30) SPIFI
name : SSP0
description : SSP0/1
base address : 0x0
Interrupt (22) SSP0
name : SSP1
description : SSP0/1
base address : 0x0
Interrupt (23) SSP1
name : TIMER0
description : Timer0/1/2/3
base address : 0x0
Interrupt (12) TIMER0
name : TIMER1
description : Timer0/1/2/3
base address : 0x0
Interrupt (13) TIMER1
name : TIMER2
description : Timer0/1/2/3
base address : 0x0
Interrupt (14) TIMER2
name : TIMER3
description : Timer0/1/2/3
base address : 0x0
Interrupt (15) TIMER3
name : UART1
description : UART1
base address : 0x0
Interrupt (25) UART1
name : USART0
description : USART0_2_3
base address : 0x0
Interrupt (24) USART0
name : USART2
description : USART0_2_3
base address : 0x0
Interrupt (26) USART2
name : USART3
description : USART0_2_3
base address : 0x0
Interrupt (27) USART3
name : USB0
description : USB0 Host/Device/OTG controller
base address : 0x0
Interrupt (8) USB0
name : USB1
description : USB1 Host/Device controller
base address : 0x0
Interrupt (9) USB1
name : WWDT
description : Windowed Watchdog timer (WWDT)
base address : 0x0
Interrupt (49) WWDT
Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !
This website is sponsored by Embeetle, an IDE designed from scratch for embedded software developers.